Bluetooth Gateway für Schutz- und Überwachungssysteme

INT600 DB Gateway

The KRIWAN diagnosis system allows data collected in KRIWAN diagnosis devices to be output via the DP interface. As a result, users can evaluate the functioning of the machine in the real application and react more quickly to breakdowns, as necessary.The INT600 DB Gateway allows for a connection via Bluetooth.

 

Article number

02 S 377 S021

Product information

Find all important information about your product.

A diagnosis device can be read via the DP input. The Bluetooth data transmission enables the further processing of the data in a PC, smartphone, or the like. The INTspector app is available for smartphone and PC applications in the respective stores. The built-in LEDs signal the current activities of the Gateway.

This Gateway is characterised by the following features:

  • Direct connection of KRIWAN diagnosis devices via plug connection
  • Very simple analysis of the individual interfaces by function LEDs, which flash when data is being transferred
Supply voltage 3V DC (button cell CR2032)
Permissible ambient temperature TA -10...+55 °C
Communication up to 200 hours (210mAh buttoncell)
Current consumption duringoperation 1,3 mA
Standby current consumption (disconnected from diagnosis device) 350 nA

Connection type

– KRIWAN diagnosis device

– End device

 

M8 plug (unshielded)

Bluetooth 4.2 and higher

Transfer range 10 m in free field
Dimensions See dimensions in mm
Weight Approx. 54g
Check base EN 301 489-1/-17,
EN 300 328 V2.1.1, EN 62368,
EN 50371:2002

The most frequently asked questions about the
INT600 DB Gateway

What is the INT600 DB Gateway used for or when?

The INT600 DB Gateway (Bluetooth gateway) enables the connection between a KRIWAN diagnostic device and an end device with Bluetooth interface (e.g. smartphone or similar). The INTspector App can be used to parameterize all KRIWAN diagnostic devices and read out the operating data.

What is the Pairing / Write button and LED on the INT600 DB Gateway for?

The Pairing / Write button must be pressed to pair the INT600 DB Gateway with the end device to be used (e.g. smartphone or similar). The built-in LED signals the current activity of the INT600 DB Gateway between the KRIWAN diagnostic device and the end device. For details, refer to the documentation of the INT600 DB Gateway.

What are typical end devices with which the INT600 DB Gateway is used?

Typical end devices are e.g. a smartphone or similar with a Bluetooth interface 4.2 and higher.

Why does the INT600 DB Gateway no longer have a connection to the end device?

Bluetooth is a radio signal that can break off depending on the ambient conditions. The distance between the INT600 DB Gateway and the end device to be used (e.g. smartphone or similar) must not exceed 2m.
The INT600 DB Gateway also has a battery (CR2032 button cell), which must have sufficient power.

What should be considered when changing the battery?

Make sure that the INT600 DB Gateway is disconnected from the KRIWAN diagnostic device and that the correct battery type (button cell CR2032) is used. For details, refer to the INT600 DB Gateway documentation.

What is included in the scope of delivery?

The package contains the INT600 DB Gateway and the brief instructions

Who can I contact if I have any questions?

We are happy to help you with questions. To do this, simply use the contact form on our homepage and send us a request. Our customer support will get in touch with you.

Accessories

Find the right accessories for our products.

 

Modbus-Gateways

Connect your KRIWAN diagnostic devices via Modbus gateway

Learn more

USB-Gateway

Connect your KRIWAN diagnostic devices to the INTspector app via USB gateway

Learn more

DP cable

For the right connection between your protection device and the gateway

Learn more

INTspector App zur Fehler- und Zustandsdiagnose

INTspector App

For parameterizing your device and reading out all important data

Learn more

You have further questions? Our experts will be pleased to advise you!